2835 VS 5630 SMD LED

Product Detail

2835 LED Series:




Part NO.	Color	Power	Volt	Current	CCT/ Wavelength	CRI	Luminous Flux
SOL-2835X020-03	White	0.2W	2.8-3.4V	60mA	2700K 3000K 4000K      5600K 6500K	>80	22-24LM
							24-26LM
							26-28LM
SOL-2835X050-03	White	0.5W	2.8-3.4V	150mA	2700K 3000K 4000K      5600K 6500K	>80	55-60LM
							60-65LM
							65-70LM
SOL-2835X060-09	White	0.6W	9.2-9.8V	60mA	2700K 3000K 4000K      5600K 6500K	>80	65-70LM
							70-75LM
SOL-2835X060-18	White	0.6W	18.4-19.6V	30mA	2700K 3000K 4000K      5600K 6500K	>80	65-70LM
							70-75LM
SOL-2835X100-09	White	1W	9.2-9.8V	100mA	2700K 3000K 4000K 5600K 6500K	>80	110-120LM
							120-130LM
SOL-2835X100-18	White	1W	18.4-19.6V	60mA	2700K 3000K 4000K 5600K 6500K	>80	110-130LM
SOL-2835X100-48	White	1W	46-51V	20mA	2700K 3000K 4000K 5600K 6500K	>80	110-130LM

 





? Typical optical characteristics curves











? Intensity Bin Limit (IF = 150 mA)

Bin code	Flux(lm) for reference
	Min	Max
1	50	55
2	55	60
3	60	65
4	65	70
5	70	75
6	75	80

? VF Bin Limit (IF = 150 mA)

Bin code	Min.(V)	Max.(V)
1	2.6	2.8
2	2.8	3.0
3	3.0	3.2
4	3.2	3.4
5	3.4	3.6

? Chromaticity CIE 







? Color Bin Limit (IF = 150 mA)














?Requirements for application and reflow soldering

Reflow Soldering
Pre-heat	120~160?
Pro-heat time	120 seconds Max.
Peak temperature	245? Max.
Soldering time	10 seconds Max.
Condition	Refer to Temperature-profile

After reflow soldering rapid cooling should be avoided

Temperature-profile(Surface of circuit board)  

Use the following conditions shown in the figure.  

      <Pb-free solder>                                      <Lead solder>



1.Reflow soldering should not be done more than two times   

2.When soldering,do not put stress on the LEDs during heating







Our Advantage:

?Free samples are availale,3 years guarantee time.
?Perfect production line to guarantee perfect quality.
?Own the LED special dust-free, anti-static workshop. 
?Formed a number of world-class United States ASM automatic machine crystalline solid, 
?ASM automatic soldering machines, H120 automatic LED light colour scanner make sure the quality.

  

Packaging & Delivery

Packaging Details

4000pcs/reel, each reel Anti-static vacuum Bag




Delivery Time

Shipped in 3-5 days after payment

 






 Application:

1. car: dashboard, brake lights, turn signals;

 

2. Backlight: LCD screen, keyboard, advertising keyboard;

 

3. Status indication: consumption or industrial electronic devices;

 

4. Other use occasions.

 



Cautions:

1.Storage  
Before opening the package:The LEDs should be kept at 5~30°C and 60%RH or less. The LEDs should be used within a year. After opening the package:The LED must be used within 24 hours, else should be kept at 5~30? and 30% RH or less. The LEDs should be used within 7days after opening the package. If unused LEDs remain, they should be stored in moisture proof pachages .recommend to return the LEDs to the original moisture proof bag and to reseal the moisture proof bag again. If the LEDs have exceeded the storage time, baking treatment 
should be performed more than 24 hours at 60 ± 5°C.


2.Soldering Iron
  When hand soldering, keep the temperature of iron below less 300? less than 3 seconds
  The hand solder should be done only one times


3.Repairing 
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed in advance  whether the characteristics of LEDs will or will not be damaged by repairing.




Handling Precautions:

1.Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more prone to damage by external mechanical force . As a result, Special handling precautions must be observed during assembling using silicone encapsulated LED products, Failure to comply might leads to damage and premature failure of the LED.





2.Handle the component along the side surface by using forceps or appropriate tools; do not directly touch or Handle the silicone lens surface, it may damage the internal circuitry.




3.The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to
 prevent air leaks. The inner diameter of the nozzle should be  as large as possible. A pliable
 material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during 
pickup. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production.




4.Do not stack together assembled PCBs containing LEDs.Impact may scratch the silicone lens or damage the internal circuitry.




5.Not suitable to operate in acidic erivironmengt.PH<7.

 

FAQ

Q1.How to buy our products?

You can directly contact our sales team by email or make a call. We will respond with quick service maximum within 12 hours

 

Q2. Can I have a sample order for SMD LED chips?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

 

Q3.What about the lead time?

A:Sample needs 3-5 days, mass production time needs 5-7 days for order quantity of 100kk.

 

Q4.Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

 

Q5. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

 

Q6.How to proceed an order for SMD LEDs ?

A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.

 

Q7.Do you offer guarantee for the products?

A: Yes, we offer 3 years  warranty to our products.

 

Company:








Patents:







our service

1.For all your inquires about us or our products, we will reply you in details within 24 hours.
2.We provide 3-year warranty for our products.
3.We provide RoHS, CE, all kinds of certification.

 






Alisa Huang

Guangdong Elite Optoelectronic Technology Co., LTD

Mobilephone:+86-18033336027

Tel:0769-89080660-824

Fax:0769-89080658

Email:ruilu_sales1@elitebm.com

 

Contact: Carol Chen

Mobilephone:+86-13798703095

Telephone:+86-769-88941998

Email:elite1@elitebm.com