LED SMD 2835 Suppliers

Product Detail

Product Description

1).High quality warm white chip 2835 smd led 0.2w the vertical structure: Chip direct conduction fins to improve the heat dissipation performance, which can withstand the higher current (40-60mA)

2).Large heat sink: larger than 3528,3014 heat sink 2-3 times, excellent heat dissipation design, light decay of LED chip life more secure

3).Oversized light-emitting surface: to improve the rate of light: up to 90%.

4).Ultra-thin structure: to solve the 3528,3014 been long-standing problem spot;

5).High optical efficiency: higher than 3528,3014 luminous efficiency 2-3 times the luminous efficiency of up to 90-100LM / W;

6).Super stability: low light fades material, process, process maturity and stability.

7). The high cost: to achieve the same luminous flux, than 3528,3014 costs reduced more than 20%






 

? Intensity Bin Limit (IF = 60 mA)  

Bin code	Flux(lm) for reference
	Min	Max
1	30	31
2	31	32

? VF Bin Limit (IF = 60 mA)

Bin code	Min.(V)	Max.(V)
1	2.6	2.7
2	2.7	2.8
3	2.8	2.9

? Chromaticity CIE 










? Color Bin Limit (IF = 60 mA)











?Requirements for application and reflow soldering

Reflow Soldering
Pre-heat	120~160?
Pro-heat time	120 seconds Max.
Peak temperature	245? Max.
Soldering time	10 seconds Max.
Condition	Refer to Temperature-profile

After reflow soldering rapid cooling should be avoided

Temperature-profile(Surface of circuit board)  

Use the following conditions shown in the figure.  

 

      <Pb-free solder>                                           <Lead solder>



1.Reflow soldering should not be done more than two times    

2.When soldering,do not put stress on the LEDs during heating







?Reliability

(1)  TEST ITEMS AND RESULTS 

Type	Test Item	Ref.Standard	Test Conditions	Note	Number of Damaged
Environmental Sequence	Resistance to Soldering Heat(Reflow Soldering)	JESD22-B106	Tsld=260?,5sec	2 times	0/100
	Temperature Cycle	JESD22-A104	-40?30min ??5min 100? 30min	100 cycle	0/100
	Thermal Shock	JESD22-A106	-40?15min ??5min 100? 15min	100 cycle	0/100
	High Temperature Storage	JESD22-A103	Ta=100?	1000 hrs	0/100
	Low Temperature Storage	JESD22-A119	Ta=-40?	1000 hrs	0/100
	Power temperature Cycling	JESD22-A105	On 5min -40?>15min ??    ??<15min Off5min 100?>15min	100 cycle	0/100
Operation Sequence	Life Test	JESD22-A108	Ta=25? IF=150mA	1000 hrs	0/100
	High Humidity Heat Life Test	JESD22-A101	80?RH=80% IF=150mA	1000 hrs	0/100

(2)  CRITERRIA FOR JUDGING THE DAMAGE

Item	Symbol	Test Conditions	Criteria for Judgement
			Min.	Max.
Forward Voltage	VF	IF=150mA	--	U.S.L*)×1.1
Reverse Current	IR	VR=5V	--	U.S.L*)×2.0
Luminous Intensity	IV	IF=150mA	L.S.L**)×0.7

                       U.S.L.:Upper Standard Level              L.S.L.:Lower Standard Level




Applications :

?All kinds of strip and tube.
?Switches, keys backlighting
?Electronic display panel light
?Marker lights,reading lamps.
?Outdoor backlighting displays.
?External and internal automotive lighting.
?Panel light,candle light,downlight ,bulb lights.
?Emergency lighting,signal and symbol luminaire, etc.



Packaging & Delivery

Packaging Details

4000pcs/reel, each reel Anti-static vacuum Bag




Delivery Time

Shipped in 3-5 days after payment

 



Cautions:

1)Soldering Conditions

Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.




2)Static Electricity

It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.All devices, equipment and machinery must be properly grounded.Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (VF > 2.0V at IF=0.5mA) 




3)Moisture Proof Package

It is recommended that moisture proof package be used .




4)Storage

Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.




5)After opening the package, The LEDs should be soldered within 24 hours (1days) after opening the package.

 

FAQ

Q1.How to buy our products?

You can directly contact our sales team by email or make a call. We will respond with quick service maximum within 12 hours

 

Q2. Can I have a sample order for SMD LED chips?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

 

Q3.What about the lead time?

A:Sample needs 3-5 days, mass production time needs 5-7 days for order quantity of 100kk.

 

Q4.Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

 

Q5. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

 

Q6.How to proceed an order for SMD LEDs ?

A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.

 

Q7.Do you offer guarantee for the products?

A: Yes, we offer 3 years  warranty to our products.

 

Our Services

1.For all your inquires about us or our product ,We will reply you indetails with 24hours.

 

2.We offer OEM service,Your own logo can be printed on the products .for the packing we also can customize the retail box packing.

 

3.Three years warranty.

 

4.After sale service : During the warranty time , all the problems caused by our products quality .we will 100% responsible for you ,remake the products for you freely togerther with next order.

 

Company:








Patents:




   


Contact:

Alisa Huang

Guangdong Elite Optoelectronic Technology Co., LTD

Mobilephone:+86-18033336027

Tel:0769-89080660-824

Fax:0769-89080658

Email:ruilu_sales1@elitebm.com




Contact: Carol Chen

Mobilephone:+86-13798703095

Telephone:+86-769-88941998

Email:elite1@elitebm.com